- Excellent material: The material used for this garage door seal is very Sturdy and wear-resistant for long-term use.
- Performance: the garage door weather stripping bottom seal forms a tight seal with the door with a good fit. It prevents water from entering under the garage door when it rains. Keeps wind, snow and other things out of the garage in winter. Insulation in summer. Keeps garage drier, cleaner and quieter.
- Compatibility: This door blocker for bottom of door is compatible with clopay 9 foot garage door for “single slot” bottom garage door seal. Before purchasing, to avoid buying the wrong one, please remove the old one to see if it is the type you need.
- Easy to install : Two people can easily install the product. One guides the seal into the track and pulls it while the other supplies the garage door seals. This helps to simplify the installation process by thoroughly cleaning the track after removing the old seals.
- After-sales service: If there is any dissatisfaction with the received goods, please take it easy and contact me in a timely manner. I will definitely give you a satisfactory answer! we will show you our sincere attitude and satisfactory solution within 24 hours.
Product Description
Look closely at your existing seal – then compare to the line images above.
It have two different bottom weatherseals for Clopay garage doors
If your door have a single channel on the bottom – THIS IS THE CORRECT SEAL.
If your door has a dual channel at the bottom to receive the weather seal – THIS IS NOT THE CORRECT SEAL.
Installation tips:
Installs easily with two people.
One forms and guides seal into track and the second person pulls the weather seal along the channel on the bottom of the door.
Use a lubricant such as WD40 to lubricate the channel, that greatly helps the weather seal to slide into and down the channel or retainer.
DO NOT stretch the weather seal, pull the seal so that it is not stressed and is sitting freely in the retainer,
then and only then, trim off any excess weather seal and lightly pinch the channel ends to hold the weather seal in place.